To press aluminum cans/tins using a packing baler, follow these steps:

1. Collect and sort the aluminum cans/tins: Gather all the aluminum cans/tins that you want to press and make sure they are clean and free from any debris or liquid.

2. Set up the packing baler: Place the packing baler in a suitable location with enough space to operate. Ensure that it is securely placed and stable.

3. Adjust the baler settings: Depending on the specific model of the packing baler, you may need to adjust the settings such as pressure, size, and compression time. Follow the manufacturer's instructions for the specific baler you are using.

4. Load the cans/tins into the baler: Open the baler and start loading the aluminum cans/tins into the designated area. Make sure to distribute the weight evenly and avoid overloading the baler.

5. Close the baler: Once the cans/tins are loaded, close the baler securely. Ensure that all safety measures are in place and that no one is in close proximity to the baler during operation.

6. Activate the baler: Start the baler according to the manufacturer's instructions. This may involve pressing a button, turning a switch, or using a control panel. The baler will compress the cans/tins into a compact form.

7. Monitor the compression process: Keep an eye on the baler as it compresses the cans/tins. Ensure that the compression is consistent and that the baler is functioning properly.

8. Remove the compressed bales: Once the compression process is complete, open the baler and carefully remove the compressed bales of aluminum cans/tins. Place them in a designated area for storage or recycling.

9. Repeat the process: If you have more cans/tins to press, repeat the steps above until all the aluminum cans/tins are compressed.

10. Dispose of the compressed bales: Dispose of the compressed bales of aluminum cans/tins according to your local recycling guidelines. They can be sold to recycling centers or used for various purposes.

Remember to always follow safety guidelines and wear appropriate protective gear when operating a packing baler.

We not only have these Baler Machine , but have other machines such as 125Ton Alu Cans Tins Baling Press, Vertical Scrap Aluminum Extrusions Compactor, Two Ram Alu Cans Tins Baling Press, Hydraulic Stainless Steel Baler With Conveyor, Low Price Stainless Steel Baler With Conveyor, Scrap Wire Compress baler, Small Scale Aluminum Scrap Baler, Vertical Scrap Aluminum Extrusions Press Baler, Fast Tins Cans Baler, Automatic Iron Scrap Baling Machine, Low Price Tins Cans Compactor, Stainless Steel Hydraulic Baler, Aluminium Cans Press Baling Machine, Low Price Pop-Top Cans Baling Press, Two Ram Pop Cans Compress Baler, Low Price Tinplate Baling Machine, Automatic Copper Scrap Packing Baler, China Supplier Alu Cans Tins Press Baler, Low Price Aluminum Tins Baling Machine, Small Pop-Top Cans Baling Press, China Supplier Aluminum Cans Packing Baler, Remote Control Metal Scrap Baler, Inida Light Metal Baler, Metal Shearing And Baling Machine, Low Price Waste Cans Press Baler, Automatic Aluminum Cans Baler, 100Ton Alu Cans Tins Compactor Machine, Forward Out Scrap Metal Baling Machine, Iron Scrap Baling Press baler, Big Scrap Metal Baler Machine, High Speed Used Beverage Cans Baler With Conveyor, Small Zip Top Cans Compactor Machine, China Stainless Scrap Baler With Conveyor, Low Price Waste Steel Compactor, Hopper Feed Waste Cans Baler, Fast Alu Cans Tins Baler With Conveyor, Jiangsu Factory Light Metal Compactor Machine, India Pop Cans Baling Machine, Low Price Ring-Pull Cans Packing Baler, Hydraulic Tinplate Baling Press etc... 

Please contact with us if you have any questions.

Parameters:

Features:

> World famous brand of Siemens PLC to promise you run the machine without any worry.

> Stable hydraulic system to keep the machine run well.

> Adopts Two rams structure to keep high bale density.

> Adopts simple structure, easy to operate and maintain.

> 24 hours reply, video, phone call, email support, if any question, we response at first time.

FAQ:

> What is warranty time of the Waste Cans Press Baler?

The warranty time of the baler machine is 12 months normally, also can you can pay extra fees for more times such as 24 months or 36 months, within the warranty time, we are responsible for the baler machine except the spare parts.

> Are the interchangeable wear plate installed on UBC Press Baler?

Yes, the wear steel plate is changeable, you can easily change it when which wear plate is going to change, and we also can weld the wear plate directly, because this way, it is durable ans stable.

> How much pressing force of Aluminium Scrap Press Compactor?

The pressing force of the baler machine is different depends on which model will you need, if you have small capacity, and small bale size and bale weight, then small baler is Ok for you, and the pressing force is small accordingly, such as 100tons or 125tons.

> How long is the non-load cycle time of Tinplate Scrap Pressing Baler Machine?

The single non-load cycle time is approx. 60 seconds, and we can make it faster or lower according to your requirement, such as 30 seconds one bale, or 90 seconds for one bale.

> How to maintain Aluminum Ubc Can Baler?

When you were operating the baler machine, you need to clean the oil tank every 3 months, and check the wire, and oil pipe leakage or not, and also check the bolt every shift, you can find all maintenance items in the user manual.